High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to apply for high performance protection. Corrosion protection. Antifouling. Interprotect® is a quick drying, easy to apply two-pack epoxy primer for high performance protection on all rigid substrates. It’s two-component application gives. International Interprotect Epoxy Primer:: Two pack, quick drying anticorrosive epoxy primer for wood, steel and aluminium. Available now at

High Performance Epoxy Primer for steel, aluminium and wood, quick drying and easy to inernational for high performance protection. Antifouling tie coat for use over epoxy primers.

Matt Specific Gravity 1. Degrease with interproect or Super Cleaner. Use angle grinder on small areas. Coarser grades are recommended to achieve optimum adhesion. Clean thoroughly and allow to dry.

Prime using a recommended International primer as soon as possible within 8 hours as detailed for specific coating systems. Clean thoroughly and allow to dry completely. Lightly gritblast to produce a profile of 50 microns. Sand well using grit paper or power wire brush Clean thoroughly and allow to dry. Prime using a recommended International primer as soon as possible within 8 hours as detailed forspecific coating systems.

Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying products recommended for application direct to wood see specific coating systems. If filling is required, use appropriate filler after the first interproetct of Interprotect has been applied. Before painting, remove any dust with a dust cloth.

Apply the following number of coats: When used as a tie coat over Interprime Stir or shake individual components thoroughly. Add Curing Agent to the Base, stir and leave for 10 minutes to allow bubbles to disperse. Do not apply when there is a chance of condensation forming on the substrate. Interprotect can be used on all suitably prepared substrates and epoxy primers.

International Interprotect Primer 2,5 Lt Grey YPA403 #458COL657

Suitable for stainless steel trim tabs and stern drive gear. It should not be used over any one-component products. Not suitable for use on bronze or mixed alloy propellers. Exposure to air and extremes of temperature should be avoided. Keep out of direct sunlight. Interprotect should be kept in securely closed containers during transport and storage. Do not discard tins or pour paint into water courses, use the facilities provided.

Interprotect Boat Primer | International

It is best to allow paints to harden before disposal. Remainders of Interprotect cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for with local authorities. The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further enquiries as to the suitability of the product for the intended purpose does so at his own risk.

Login with Facebook Cannot login with Facebook. I cookie ci aiutano a fornire i nostri servizi.

Utilizzando tali servizi, accetti l’utilizzo dei cookie da parte nostra. Cookies help us deliver our services. By using our services, you agree to our use of cookies. Maggiori informazioni Read more.